First, the use and characteristics:
SPJ-400 small plastic bottle bottling machine, small semi-automatic tablet counting machine is small in size, light in weight, low in noise, accurate in counting, easy to operate, and simple in maintenance and repair. The contact part of the drug is made of 304 stainless steel, which ensures the cleanliness of the packaged items and meets the requirements of GMP; it is an ideal special equipment for counting, bottling and bagging drugs or foods such as capsules, tablets, granules and so on. The machine adopts several pieces of electromagnetic vibration, the bottle does not rotate when the bottle is not at the unloading port, when the bottle is placed at the unloading port, the motor drives the several plates to rotate so that the drug automatically enters the bottle; it is convenient and fast to replace the counting plate of different specifications and models, without other adjustments. This machine is currently the smallest, advanced, beautiful and economically applicable counting bottling and bagging equipment in the domestic counting machinery. 

Second, the technical parameters:
Model: SPJ-400
Power supply: 220V (or 110V) 80W
Counting range: 10-500 capsules / bottle (determined by the number of wells of several plates, the general size of the tablet up to 500 capsules per time, 00 # up to 100 capsules / time, 0 # up to 120 capsules / time)
Applicable products: 00#-5# (several plates must correspond to capsules), round, oblong tablets, soft capsules, hard pills
Dimensions: 420×420×750mm
Machine net weight: 48kg

Third, usage method:
1. Connect the power supply, turn on the power switch, and make the power light on.
2. Adjust the vibration adjustment switch to the appropriate position so that the electromagnetic vibration reaches the appropriate strength;
3. Open the motor switch of several discs, adjust the speed control knob of several discs, so that the speed of several discs reaches the appropriate speed; if the speed is slowed down, the delay time of the delayer behind is adjusted, and if the speed is adjusted quickly, the delay time of the delayer behind is shortened. If it works properly, no adjustment is required.
4. Put in an appropriate amount of capsules (tablets), check that there are capsules (tablets) in each number of holes, and then you can bottle;
5. When bottled, put the bottle into the capsule (tablet) outlet, gently touch the micro switch with your finger or bottle mouth, and the number of plates will begin to rotate so that the capsules (tablets) all fall into the bottle, and the several plates will automatically stop rotating, and the bottle will be bottled. Note: After the capsules (tablets) are all dropped, it is best to stay in the lowest position, and the latter group is not in the unloading mouth, at this time you can check whether the latter group has capsules (tablets), if there are fewer capsules, manually fill it.
6, then change a bottle, and then gently touch the micro switch, several plates began to rotate again, the capsules (tablets) in a set of holes above the hopper all fell into the bottle.
Tip: (Factory when the power switch has been opened, vibration intensity, several particle disc speed has been basically adjusted, can be used directly, plug in the power supply, the vibrator will work, press the outlet of the micro switch contact strip several particle disc will rotate. In use, it can be adjusted appropriately according to the actual situation)